DCi-series.jpg
JBL LSR4328P
JBL ASB6115
JBL CBT-70JE
Lexicon Omega
JBL VT-4883
03 Jul 2010

JBL LSR4328P

09 Jul 2011

JBL ASB6115

08 Jul 2011

JBL CBT-70JE

29 Jul 2011

Lexicon Omega

09 Jul 2011

JBL VT-4883

cdi4000CDi Series Power Amplifier - 1200 Watts Per Channel at 4 Ohms, 1000 Watts Per Channel at 70V
The CDi 4000 from Crown Audio is a rugged, lightweight amplifier designed for installed audio applications. CDi stands for "Contractor Digital Intelligence". The CDi 4000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It also handles a wide range of speaker impedances and outputs, making it very versatile.

Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 4000 also has integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information.


Output Power:

  • 2 Ohm Dual (per Channel): 1,600W
  • 4 Ohm Dual (per Channel): 1,200W
  • 8 Ohm Dual (per Channel): 650W
  • 4 Ohm Bridge-Mono: 3,200W
  • 70V Dual (per Channel): 1,000W
  • 140V Bridge-Mono: 2,000W

Features:

  • Extremely versatile; rated for 2-, 4-, 8-Ohm loads and 70V and 140V outputs.
  • Switch-mode universal power supply.
  • Intuitive front-panel LCD screen for quick, easy configuration.
  • Onboard Digital Signal Processing includes crossovers, EQ filters, Delay, and output limiting.
  • Up to 20 user defined DSP presets are available.

Specifications:

  • Frequency Response (at 1 Watt into 4 Ohms, 20Hz - 20 kHz): +0/1 dB
  • Signal to Noise Ratio (below rated 8-Ohm power at 1 kHz, A-Weighted): 100 dB
  • Damping Factor (8 Ohm): 20 Hz to 400 Hz: > 500
  • Input Stage: Input is electronically Balanced and employs precision 1% resistors
  • AC Line Current:CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75AAt idle: Draws no more than 45 Watts.
  • Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
  • Input Impedance (nominal): 20 kilohms Balanced, 10 kilohms Unbalanced
  • Load Impedance (note: safe with all types of loads):Dual: 28 ohmsBridge Mono: 416 Ohms
  • Voltage Gain (at 1 kHz, 8 Ohm rated output): CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
  • Sensitivity (at 8 Ohm rated output): 1.4V
  • Maximum Input Signal: +22 dBu typical
  • Operating Temperature: 0 C to 40 C at 95% relative humidity (non-condensing)
  • AC Line Voltage and Frequency Configurations Available ( 10%): 100V, 120V-240V, 50/60 Hz
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Heat sinks and proportional-speed fan
  • Dimensions: Width, Height, Depth (behind mounting surface):EIA Standard 19 in. Wide (EIA RS-310-B) x 3.5 in. (8.9 cm) High x 12.25 in. (31.1cm) DeepCDi 6000 is 16.2 in. (41.15 cm) deep.
  • Net Weight:CDi 1000, CDi 2000, CDi 4000: 19 lb (8.6 kg).CDi 6000: 24 lb (10.9 kg).
  • Shipping Weight:CDi 1000, CDi 2000, CDi 4000: 22 lb (10.0 kg).CDi 6000: 30 lb (13.6 kg).

   ProductCrownCrown CDi-4000

Trivia : AKG Acoustics sekarang bermarkas di San Fernando Valley, berbarengan dengan perusahaan Harman Pro lainnya, Crown Audio

PT CIPTA SWARA ANUGRAH
Jl. Sultan Iskandar Muda No 16 E Pondok Indah, 12240
Jakarta Selatan. Indonesia.
Phone: +62 21 7225183
Fax: +62 21 7210517
Email: marketing@csa-indonesia.com

SERVICE CENTER

P. 021-7245869




csa facebook


csa twitter