dbx 231

dbx 231 Dual Channel 31-Band Equalizer

September 10, 2019 | Kategori: DBX, Performance Installation, Processors, dan Products.

With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut range; XLR, 20mm faders and 1/4″ inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.

The dbx 231 (2-Series) represents a major step forward in the performance of entry-level graphic equalizers. From its amazing 10Hz to 50kHz frequency response, to its 108dB dynamic range and internal toroidal transformer, the dbx 231 (2-Series) offers out of this world specifications with a down to earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the 2-Series is destined to take its rightful place in the lineage of great dbx® signal processors that are the Professional’s Choice™. With such affordable quality, there’s no longer any excuse for compromising your sound.
 

Gallery

Features:

  • Two 31-band, 1/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ±6 or ±12 dB
  • 12dB per octave 50Hz low-cut filter
  • Front panel bypass switch
  • ±12 dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS Inpts and Outputs
  • Internal Toroidal Transformer
  • Frequency Repsonse of <10Hz to >50kHz
  • Dynamic range of greater than 108dB

 

Specifications

Input Connectors 1/4″ TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40k ohm, unbalanced 20k ohm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4″ TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm,
Unbalanced 50 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohm or greater;
>+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Dynamic Range 108dB
Signal to Noise Ratio 90dB
THD+Noise <0.004%
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50Hz 12dB/octave high-pass filter
Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range
Operating Voltage 100VAC 50/60Hz;
120VAC 60Hz;
230VAC 50/60Hz
Power Consumption 15W
Power Connector IEC receptacle

 

Related Posts

dbx DriveRack VENU360

dbx DriveRack VENU360 Complete Loudspeaker Management System

Sel, 10 Sep 2019 15:25

All the processing needed to supercharge your sound system. Now with complete control from your mobile device. dbx took the dominant dbx DriveRack® 260, improved its features, and added more. The result? The 3 input, 6 output dbx DriveRack VENU360. The dbx DriveRack VENU360 provides all the processing and flexibility you need between your mixer […]

Read More
dbx di1 alt

dbx Di1 Active Direct Box

Sen, 9 Sep 2019 18:11

The dbx Di1 is a compact high-quality active direct injection box. Ideal for both studios and on the road, the Di1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise. Connect the output from electric guitars, bass amplifiers, keyboards, etc., directly to a console mixer without […]

Read More
dbx DriveRack PA2 alt

dbx DriveRack PA2 Complete Loudspeaker Management System

Sen, 9 Sep 2019 17:25

All you need to get the most from your PA. Now with complete control from your mobile device. The dbx DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, a new input delay module […]

Read More
id_IDID
+62-878-8583-1778