dbx di1 alt

dbx Di1 Active Direct Box

September 9, 2019 | Kategori: DBX, Performance Installation, Processors, dan Products.

The dbx Di1 is a compact high-quality active direct injection box. Ideal for both studios and on the road, the Di1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.

Connect the output from electric guitars, bass amplifiers, keyboards, etc., directly to a console mixer without the use of a microphone.

Built for toughness and reliability, the Di1 has all the features of a fully featured gig-ready workhorse DI unit.
 

COMPATIBLE WITH HARMAN CONNECTED PA

dbx Di1 is the ideal direct box for musicians who want to spend less time setting up and more time focusing on their music.

Unlike ordinary direct boxes, the Di1 has embedded HARMAN ioSYS technology which enables it to automatically recognize and configure with the HARMAN Connected PA app and system of products, to take the guesswork out of setting up and getting consistently great sound.

Current products with embedded ioSYS technology and HARMAN Connected PA compatibility include the Soundcraft Ui-series mixers, JBL PRX800 loudspeakers, dbx Di1 direct boxes, and AKG P5i microphones and the MDAi dynamic microphone adapter.

 

Gallery

Features:

  • Level and impedance matching function
  • Output impedance: > 600 Ohms
  • Signal pass through connector
  • Output connector: XLR balanced
  • Battery LED indicator
  • Distortion: (THD) < 0.005% at 1kHz, 0dBu
  • Phantom power LED indicator
  • Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
  • Output Noise: <-100dB unweighted
  • TS and XLR inputs and outputs
  • Frequency response: 10Hz to 70kHz, +0dB/-3dB
  • Attenuation control
  • Phantom Power: +18 volts DC to +48 volts DC
  • Ground lift switch
  • Main/Standby: 9V battery
  • Input Impedance: >250k Ohm
  • Metal Chassis

 

Specifications

Input Impedance > 250k Ohm
Max Input +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
Connectors Two Parallel 1/4″ jack connectors and a parallel XLR connector (unbalanced), 1/4″ Jack: Tip Hot, Sleeve Ground;
XLR Jack: Pin 2 Hot, Pins 1 & 3 Ground
Output Impedance > 600 Ohms
Output Connectors XLR balanced
Distortion (THD) < 0.005% at 1kHz, 0dBu
Output Noise <-100dB unweighted
Frequency Response 10Hz to 70kHz, +0dB/-3dB
Main/Standby 9 Volt battery
Phantom Power +18 Volts DC to +48 Volts DC

 

Related Posts

dbx 231

dbx 231 Dual Channel 31-Band Equalizer

Sel, 10 Sep 2019 16:34

With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut […]

Read More
dbx DriveRack VENU360

dbx DriveRack VENU360 Complete Loudspeaker Management System

Sel, 10 Sep 2019 15:25

All the processing needed to supercharge your sound system. Now with complete control from your mobile device. dbx took the dominant dbx DriveRack® 260, improved its features, and added more. The result? The 3 input, 6 output dbx DriveRack VENU360. The dbx DriveRack VENU360 provides all the processing and flexibility you need between your mixer […]

Read More
dbx DriveRack PA2 alt

dbx DriveRack PA2 Complete Loudspeaker Management System

Sen, 9 Sep 2019 17:25

All you need to get the most from your PA. Now with complete control from your mobile device. The dbx DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, a new input delay module […]

Read More
id_IDID
+62-878-8583-1778