JBL 9300D

JBL 9300 Cinema Surround Loudspeaker 2-Way Passive

September 25, 2019 | Categories: Cinema, JBL, Loudspeakers, and Products.

Cinema Surround Loudspeaker 2-Way Passive
1″ HF, 10″ Woofer (2″ VC)

The JBL 9300 Cinema Surround offers high 250 Watt power handling capability, high sensitivity, and extended base response in a groundbreaking design. The two-way 9300 features new transducer technologies, waveguide and horn designs developed specifically to produce studio quality performance with pattern control tailored to modern theatre geometries.

Combining JBL’s Image Control Technology and new asymmetric wave-shaping techniques, the JBL 9300 surround features a Wave Shaping Vane, integral to the design, to distribute acoustic energy in proper proportion to the room. This technique provides a wave-front that is sculpted to the room geometry and provides very precise coverage capability.

The JBL 9300 features a high power, long throw 250mm (10 inch) low frequency driver for smooth extended base response. The high frequency section utilizes a 25mm (1 inch) composite diaphragm compression driver with high output capability.

The unique, high tech, molded, black textured enclosure with open high frequency horn and black grill will enhance any décor.
 

Gallery

Features:

  • 250 Watt Power handling capability.
  • Wave Shaping Vane distributes an acoustic energy wave-front sculpted to the room.
  • High Frequency Horn features JBL Image Control Technology for precise pattern control.
  • Three separate horizontal mounting planes at 15 degree angles for specific positioning to improve coverage.
  • Input terminals on top of cabinet for easy access.
  • Lightweight, Rigid molded enclosure.
  • Uniform asymmetric 60 degree vertical coverage and 110 degree horizontal coverage.

 

Specifications

Frequency Range (-10 dB) 50Hz – 25kHz (2π) / 60Hz – 25kHz (4π)
Frequency Range (±3 dB) 60Hz – 20kHz (2π) / 100Hz – 20kHz (4π)
Coverage Pattern 110º × 60º asymmetric >2kHz
Power Handling 30v @ 100hrs,
40v @ 2hrs,
IEC/Pink 250W continuous pink noise
Sensitivity 96dB SPL @ 2.83v
Maximum dB SPL 120 dB continuous,
126 dB peak
Rated Impedance 8 Ω
Minimum Impedance 7Ω @ 200Hz
Crossover Frequencies 2800Hz
Low Frequency 610H
High Frequency 2414H-1
System Polarity Woofer (IEC), HF (JBL)
System Protection Network only
System Input Type Banana
Enclosure Volume 1700 sq in. (unoccupied)
Dimensions
(H x W x D)
22” x 16” x 11”
Weight 21 lbs (ea.)

 

Related Posts

JBL 3730

JBL 3730 Three-Way Tri/Bi-Amplified/Passive

Wed, 25 Sep 2019 16:33

Three-Way Bi-Amplified/Passive ScreenArray® Cinema Loudspeaker System The JBL 3730 ScreenArray provides smooth and accurate reproduction of cinema soundtracks in a compact and very cost effective system.   Gallery Features: Three-Way ScreenArray design for maximum output, optimal coverage, and minimum distortion. Bi-amplified or fully passive switchable operation. SSC™ Screen Spreading Compensation. New molded Optimized Aperture Waveguide […]

Read More
JBL 4645C

JBL 4645C Single 460 mm (18 in.) Subwoofer System

Wed, 25 Sep 2019 15:51

4645C Single 460 mm (18 in.) Subwoofer System The JBL 4645C Model is a high quality subwoofer system, featuring an advanced technology 460 mm (18 in), low frequency transducer mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The JBL 4645C is ideal for low-frequency augmentation of either analog […]

Read More
Crown DSi 2000 alt

Crown DSi 2000 Power Amplifier

Mon, 2 Sep 2019 11:50

Engineered from the ground up for unmatched quality and performance, the Crown® Crown DSi Series of power amplifiers offers four models of 500W, 800W, 1,200W, and 2,100W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between Crown DSi […]

Read More
+628-1717-11-2929